skip to main text

Making Copies

This section describes the procedure to copy with Standard copy.

  1. Check that printer is turned on.

  2. Load paper.

  3. Select Copy on the HOME screen.

  4. Select Standard copy.

    The Copy standby screen is displayed.

  5. Load original on platen.

  6. Specify settings as necessary.

    • A: The copy layout is displayed.

      Switch the layout from (single-sided), (2-on-1), (two-sided).

    • B: Specify the number of copies.

      Tap or to specify the number of copies.

      If you keep touching here, the number scrolls by 10.

      You can also flick the number to specify.

    • C: Display the print setting items.

      For more on the setting items:

    • D: Specify the page size and the media type.

  7. Press Color button for color copying, or Black button for black & white copying.

    The printer starts copying.

    Remove the original on the platen after copying is complete.

    Important

    • Do not open the document cover or remove the original from the platen until scanning is completed.

    Note

    • To cancel copying, press the Stop button.

Adding Copying Job (Reserve copy)

You can add the copying job while printing (Reserve copy).

The screen below is displayed when you can add the copying job.

Load the original on the platen and press the same button (the Color button or the Black button) as the one which you previously pressed.

Important

  • When you load the original on the platen, move the document cover gently.

Note

  • When Print qlty (print quality) is set High, you cannot add the copying job.

  • When you add the copying job, the number of copies or the settings such as the page size or media type cannot be changed.

  • If you press the Stop button while reserve copying is in progress, the screen to select the method to cancel copying is displayed. If you select Cancel all reservations, you can cancel copying all scanned data. If you select Cancel the last reservation, you can cancel the last copying job.

  • If you set a document of too many pages to add the copying job, Cannot add more copy jobs. Please wait a while and redo the operation. may appear on the touch screen. Select OK and wait a while, and then try copying again.

  • If Failed to reserve the copy job. Start over from the beginning. appears on the touch screen when scanning, select OK and press the Stop button to cancel copying. After that, copy the documents that have not been finished copying.